MAXNC 15 CL
A CLOSED LOOP SERVO CONTROLLED 3 AND 4 AXES DESKTOP MILL


The MAXNC 15 CL2 is a closed loop version of the MAXNC 15 stepper machine but using the MAXNC   new CL2 motion system for control. This new controller run 4 axes from a single parallel port from any PC, 66 mega Herts or faster (486, Pentium, AMDK, etc.)from DOS or from WINDOWS. The control reads the encoders at a rate of over 60,000 times a second and the feed-back is analyzed by the software. Based on the position of the encoders, the outputs to the motors are advanced, retarded or modified as needed. The speed at which the software operates also allows the control of the spindle motor speed from the CNC program. The servo motors used in the CL2 systems are of step configuration to obtain very fast acceleration an deceleration rates, important in continuous contouring operations. Machine operates at up to 60 inches per minute with the standard 20 threads per inch screws.
The machine comes equipped with  combination HOME and LIMIT switches and a socket for the 3D digitizer.

HARDWARE FEATURES:
10" or 12" X Travel  8" Y Travel ( 7" from spindle C/L to Z axis column) 9" Z  Travel  4" wide dovetails with 6" of support 16" or 18" long x 4" wide table    heavy duty spindle with 15 deg. taper for collets. 1/5 hp AC/DC, 10,000 max RPM. Spindle motor. Up to 45 in/min rapid and feed rates.

CONTROL FEATURES
:
Servo controller driven by the MAXNC CL2 software with the following features: "G" & "M" code programming   0.00025" resolution Linear interpolation Circular interpolation Helical interpolation Backlash compensation Keyboard jog mode Automatic cycle Line by line cycle Tool length and tool radius compensation table  Spindle motor on and off Spindle speed control from program  Screen update and acceleration/deceleration inhibit (G64) for in-interrupted contouring, and more.

Click for a list of 'G' codes

Includes software package with a mini CAM system for automatic NC program creation from CAD (DXF files).
A
3d digitizing probe  and software is available which includes a teach mode and a screen plot of the object being digitized.
An optional 4" diameter
rotary table and drive motor is also available to make it a full 4 axis system.

P/N 22000.............16" X SLIDE.---10" TRAVEL    MAXNC 15 CL...........
P/N 22100.............18" X SLIDE.---12" TRAVEL    MAXNC 15 CL........
P/N 22230.......3D DIGITIZER ...................................................
P/N 22260.......4TH AXIS ROTARY TABLE ................................ .

Click here for warranty and refund policy