MAXNC 10 CL-B
A CLOSED LOOP SERVO CONTROLLED 3 AND 4 AXES DESKTOP MILL

The MAXNC 10 CL is a closed loop version of the MAXNC 10 machine but using the MAXNC  new CL2 motion system for control. The motors are the same size physically as the MAXNC 10 open loop machine but capable of much more power and speed (about 8 times more) due to the feedback This new controller run 4 axes from a single parallel port from any PC 66 mega Herts or faster (486, Pentium, AMDK, etc.) from DOS or from WINDOWS.The control reads the encoders at a rate of over 60,000 times a second and the feed-back is analyzed by the software. Based on the
position of the encoders, the outputs to the motors are advanced, retarded or modified as needed.

The speed at which the software operates also allows the control of the spindle motor speed from the CNC program. The servo motors used in the CL system are of step configuration to obtain very fast acceleration an deceleration rates, important in continuous contouring operations. Machine operates at up to 50 inches per minute with the standard 20 threads per inch screws.  Anti-Backlash BSA  lead screws are included free in this model.
The machine comes equipped with combination HOME and LIMIT switches,a socket for the 3D digitizer and a socket for the M8 command (12 V. for coolant etc. ).


HARDWARE FEATURES:

· Now with 12" X Travel  · 5" Y Travel  · 6" Z  Travel  · 4" wide dovetails  · 11.9" long x 4" wide table    · heavy duty spindle with 15 deg. taper for collets. · 1/10 hp AC/DC, 8,000 max RPM. Spindle motor ( 1/5 , 10,000 RPM optional). · Up to 50 in/min rapid and feed rates.

CONTROL FEATURES
:
· Servo controller driven by the MAXNC CL2 software with the following features: · "G" & "M" code programming ·  0.00025" resolution · Linear interpolation · Circular interpolation · Helical interpolation · Backlash compensation · Keyboard jog mode · Automatic cycle · Line by line cycle · Tool length and tool radius compensation table  · Spindle motor on and off · Spindle speed control from program  · Screen update and acceleration/deceleration inhibit (G64) for in-interrupted contouring, and more.
 

Includes software package with a mini CAM system for automatic NC program creation from CAD (DXF files).
A
3d digitizing probe  and software is available which includes a teach mode and a screen plot of the object being digitized.
An optional 4" diameter
rotary table and drive motor is also available to make it a full 4 axis system.

P/N 22200…...............MAXNC 10 CL-B . …………………………...
P/N 22260…...............4th AXIS ROTARY TABLE…………………..
P/N 22230…...............3D  DIGITIZER…………….…………………...

 

Click for a list of 'G' codes

Click here for warranty and refund policy