COMPLETE CLOSE LOOP 3 AND 4 AXIS MOTION CONTROL SYSTEMS  WITH 'NEMA 23' SINGLE STACK MOTORS
(as used in the MAXNC 10 CL  machine)

Powerful motion system set up to be controlled from a single standard parallel port from a PC computer, using the included MAXNC CL2 software for "G" code format, or using custom software from the user. Motors are capable of over 1,000 RPM with 1.8 Deg. Shaft resolution ( 4 times the speed and power of the open loop 145 oz. System).

Includes: Controller with power supply; 3 or 4 motors with encoders;  Motor and encoder cables; Parallel port cable; CL2 driver software for PC computers with manual.
CL2 software features: "G" & "M" code programming   Linear interpolation Circular interpolation Helical interpolation Backlash compensation Keyboard jog mode Automatic cycle Line by line cycle Tool length and tool radius compensation table  Spindle motor on and off Spindle speed control from program  Screen update and acceleration/deceleration inhibit (G64) for un-interrupted contouring, and more.

If the controller is to be used with other driver software, it requires only 2 output lines per motor from the parallel port, in  quadrature mode, and 2 input lines total for feedback. 4 axes can be driven with a single parallel port.

With single stack motors (as shown)

P/N 22155...  3 axis Motion Control System ....P/N 22160...  4 axis Motion Control System .P/N 22156...  3 axis Retrofit Kit for Maxnc 10 or 15 (includes limit Sw's.)

P/N 22161...  4 axis Retrofit Kit for Maxnc 10 or 15 (includes limit Sw's.)..

With double stack motors (up to 210 oz/in)

P/N 22222...  3 axis Motion Control System 
P/N 22224...  4 axis Motion Control System 

Click for a list of 'G' codes

Click here for warranty and refund policy